90 out of 100 people make mistakes in heating water with rods, know the correct way to use immersion rods.

Put rod in plastic bucket

While heating water with immersion rod, keep in mind that you should never heat it in a steel or iron bucket. Water heating rods should always be used in a plastic bucket only. Metal bucket can also prove dangerous. Apart from this, never use the immersion rod by keeping it on the ground. Wherever you keep the bucket, that place should be dry.

Take care of connection and timing

The plug of the immersion rod should be in good condition. If any wire is cut or damaged, replace it immediately. Do not switch on the rod before putting it in the water and always take the rod out only after turning off the switch. Apart from this, do not keep the rod on for too long while heating water. Use as per need and unplug immediately.

keep the right amount of water

There must be enough water in the bucket to completely submerge the heating part of the rod. If part of the rod remains outside, it may burn if it overheats. Note that minimum and maximum water marks are given on the rod. You should fill water in the bucket accordingly. So that there is no danger. If the rod is damaged, do not use it to heat water. Reuse rods to decorate home Can.

Keep these things in mind while buying a rod

• While buying an immersion rod, look for the ISI mark certified by the Bureau of Indian Standards (BIS). So that quality is not compromised.
• Before purchasing an immersion rod, one should check the power rating. The higher the wattage of the rod, the faster it will be able to heat water.
• The build quality of the immersion rod should also be good, stainless steel or copper rods are considered the best.
• Before buying a rod, check its customer reviews, this will help you buy a better quality immersion rod.